Suspension systems, especially when referring to 4WDs, are extremely complex. Determining the right solution for each 4WD requires special attention to many factors, with weight being the most critical. Old Man Emu 4×4 suspension by ARB approaches this in a unique way.
Instead of offering a compilation of parts that have been chosen primarily to increase the vehicle’s ride height, OME 4×4 suspension provides a range of tuned, matched and integrated systems, each offering optimum levels of comfort, load carrying capability and control characteristics.
The complete Old Man Emu suspension range incorporates more than just 4×4 shock absorbers and springs. At ARB, we take integration to the highest level with our own selection of bushes, U bolts, centre bolts, spring liners, trim packers and suspension fitting kits.
Old Man Emu employs a team of full time ride control engineers to carry out an exhaustive testing and development program on each component in an Old Man Emu suspension system. Access to a long list of sophisticated test equipment ensures all development work has an unrelenting, no compromise approach.
During development, each new Old Man Emu suspension system is tested not only for practical performance, but also to ensure compatibility with modern vehicle safety features such as electronic stability control, an area in which ARB has invested heavily in.
Where the purpose of a spring is to carry the load of a vehicle and its cargo, a shock absorber works to control the spring by absorbing excess energy and, in doing so, has a profound impact on your vehicle’s ride and handling.
During the development of OME’s Nitrocharger Sport shock absorbers, particular focus is placed on how well they are matched to the specific springs they’ll be controlling, with Ride Control Engineers tailoring shock absorber valving to work with the different springs in the range, often resulting in multiple shock absorber options for each vehicle.
Whether it’s for work or play, ARB has a solution for just about any application.
The Nitrocharger Sport range utilises significant advances in key componentry and the latest in valving technology to provide tremendous improvements in ride, comfort and handling over all terrains.
Vehicle specific valving ensures the proper valving is matched to your spring selection, accessory fitment and load carrying requirements, meaning there’s a Nitrocharger Sport Shock Absorber to suit your needs, no matter what the terrain or intended vehicle use.
Nitrocharger Sport Shock Absorbers offer the most cohesive, balanced and finely tuned valving system on the market.
High quality, vehicle specific bushes manufactured from polyurethane and rubber materials for extended life.
Impact resistant, polyamide dirt shield provides additional protection from stone chips and off road debris.
Super strong 18mm induction hardened chrome piston rod is engineered to handle rigours of heavy loads and tough 4x4 touring.
Large, durable seal incorporates a gas retention check valve design to virtually eliminate contaminant damage while providing outstanding gas
and oil retention.
Teflon infused bronze slip ring ensures a more consistent and uniformdamping performance by providing better control of oil flow between the rod and rod guide.
Large, low friction Teflon impregnated bronze bushing for long lasting durability.
Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance.
Free flowing design reduces aeration and high oil temperature, extending shock absorber performance under harsh conditions.
Durable rebound and compression multi deflective disc stacking on either side of the free flowing piston allows infinite tuning options.
Petroleum based, high performance formula designed to resist fade and aeration for improved durability and shock absorber performance.
Heavy gauge (1.6mm) steel reserve tube is 23% more effective than common 1.3mm wall tubing to protect internal components from stone damage.
ng
Six valving discs allow greater valving options for maximum ride and handling performance.
When undertaking remote area travel, the need to carry sufficient fuel, water, vehicle spares and safety equipment invariably means that your 4WD will be fully loaded, placing a lot of strain on suspension components.Combine this with punishing off road conditions, and the limitations of standard springs soon become apparent. Whether it’s coils, leaves or torsion bars, Old Man Emu springs are designedto improve the load carrying capability of your 4WD, allowing you to tackle more challenging terrain with confidence.
Old Man Emu leaf springs are engineered to provide optimum ride performance irrespective of the operating conditions in which they operate.
Numerous spring options are available to suit a multitude of applications, allowing you to set your vehicle up for recreational or commercial purposes.
Feature packed, a set of Old Man Emu leaf springs, matched to a set of Old Man Emu 4×4 shock absorbers will deliver vastly improved ride, handling
and load carrying capability.
Draw tapered and diamond cut leaves ensure the load is progressively distributed over a larger surface area, reducing the high stresses that develop at leaf ends, increasing ride comfort and longevity
Leaf clamps are bolted to allow installation of anti squeak nylon liners
Fully scragged to ensure the spring takes a permanent ‘set’ which reduces the risk of sagging
Load testing ensures the spring meets the required specification
Military wrap designed to provide added safety
Re-greasable nylon interleaf anti friction pads reduce friction at the leaf tips where the load is the greatest
Flat axle seat area allows a positive, safe axle mount reducing spring stress and increasing spring life
The tension side of all leaves is shot peened to reduce spring stress. This process can double the life of a spring
Two-stage leaf pack featured on most rear springs for optimum comfort. When unladen, the vehicle is largely riding on the primary stage, with the secondary stage providing additional support when a heavy load is added
PLEASE NOTE: Most Old Man Emu Leaf Springs have all the listed features, but where design or a physical limitation exists, one or more of these features may not be incorporated. Please check with your OME licensed dealer for further information.
Should your Old Man Emu 4WD suspension system include leaf springs, bushes require periodic lubrication to ensure longevity.
OME greasable shackles and pins facilitate this without the need to remove the shackles, greatly reducing the time and effort involved.
Unique, easy bolt together assembly eliminates out of angle shackle pin to side plate’ problems commonly associated with press fit assemblies
Each pin has two grease outlet holes to guarantee maximum grease coverage between the shackle pin and the spring bush – increasing bush life and improving ride quality
Heat treated pins ensure long life under heavy loads and off road conditions
Side plates are zinc plated for protection against corrosion
ARB designs an extensive range of Old Man Emu coil springs for each vehicle, using state of the art micro-alloyed spring steel to ensure superior resistance to sagging and corrosion. With such a wide range on offer, coil springs can be better matched to your specific load requirements and intended vehicle usage. While ride height increases are attained, a greater emphasis is placed on ridecontrol improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system designed specifically to suit your vehicle.
Manufactured from state of the art micro-alloyed spring steel for superior strength and durability
Double scragged before and after shot peening to reduce spring stress and enhance spring life
Constant and variable rate coils available for multiple applications
Formed on computer controlled, precision mandrels to ensure manufacturing consistency
Spring end configurations designed to exact specifications, guaranteeing perfect fitment to your vehicle
Finished in durable, hard wearing black powder coat
Designed and manufactured in Australia
Old Man Emu Torsion Bars dramatically improve your vehicle’s ride and handling, both on road and off. They are designed and set for optimum ride performance, while maintaining maximum wheel travel which is crucial during off road driving. Old Man Emu Torsion Bars work best when Old Man Emu coil or leaf springs are fitted to the rear of your vehicle, with bars and springs then carefully matched to our premium range of 4WD shock absorbers.
Together, they’ll transform your vehicle’s suspension performance.
Manufactured from premium grade spring steel with a resilient powder coat to protect against corrosion
Precision drawn, dropped forged ends for optimal strength and integrity
Pressure rolled splines for precise fitment and increased spline durability
Hardened and tempered to exact specifications for improved performance
Preset and hardened to prevent sagging and increase life cycle
As another integral component of the Old Man Emu 4WD suspension range, steering stabilisers are designed to reduce the effect of wheel vibration and
improve the feel, handling and control of the vehicle. They will also reduce the aggressive rotation of the steering wheel over rough roads without affecting
steering wheel return.
9 stage coil spring valving for optimum performance
15mm piston rod provides improved strength
Stone guard protects the piston rod against stone damage
35mm piston and bore allows increased oil volume
Twin tube design protects the internal components against stone damage
Multi lip seal prevents oil loss
Original stabiliser mounts are used where appropriate
The OME range doesn’t just stop with shocks, springs and bushes. At ARB we take integration to the highest level with our own range of
OME offers a variety of urethane and rubber bush kits for shock absorbers, leaf springs, pan hard rods, control arms and sway bars. Unique features
like our exclusive splined leaf spring bushes and caster correction kits ensure proper performance.
Old Man Emu products come complete with a vehicle specific fitting kit for easy installation and peace of mind.
